06-06-2018, 01:01 PM
rabiddawg Wrote:There is a modification you can do to the front of the mag. Basically you clearance the front edge with a dremel.
Since you mentioned the fired round isn’t being ejected, I would radius the edge of ejector. While you are at it, go ahead and file the edges of the extractor too.
Do a search as I don’t have links to the mods.
I attacked the mag with the Dremel this morning. Worked on the front of the mag and also removed two coils from the mag spring. Runs fine on both brands of ammo. I didn't need to go after the extractor or the ejector since it seems to be a mag problem. I purchased the E-landers because of the good reviews. I had suspected that the mag might be the problem when I started poking around on the internet. Thanks for the advise.