06-04-2018, 07:07 PM
So, a little history. The 12" Grrr bug bit me last year, so ordered one up (thanks BFT!), built a trued and bedded upper for the 12" and used my 5.56 pistol as a doner. Fast fwd to this past Memorial day with all the old guy tinkertoy crack on sale which, of course compelled me to buy a Spikes FDE receiver set. This required me to separate the 12" from its Permatex 24300 bedded upper.
Necessity is the mother of invention - cut a 9" section of 1/2" schedule 80 PVC, wrapped a couple sections of electrical tape around the pipe to fit the receiver's ID. Slid it in the back of my clamshelled receiver, and 4-5 hammer whacks broke the barrel free! Bob's you uncle, total tool cost, $1.43... and no parts damaged...!
Necessity is the mother of invention - cut a 9" section of 1/2" schedule 80 PVC, wrapped a couple sections of electrical tape around the pipe to fit the receiver's ID. Slid it in the back of my clamshelled receiver, and 4-5 hammer whacks broke the barrel free! Bob's you uncle, total tool cost, $1.43... and no parts damaged...!
DOJ+FBI+IRS+AFT=NKVD. Joe Stalin and Lavrentiy Pavlovich Beria are tap dancing in hell right now...