01-08-2012, 12:18 AM
The scratches on the bullet are normal. It happens as you extract a loaded round, the ejector spring is forcing the bullet into the barrel extension lugs which are relatively sharp.
The scratches on the case are something else and should not be there.
Since this is factory ammunition I would expect it to be within tolerance and should not be causing a difficult bolt close.
My advice is to contact AA immediately for corrective action.
Bob
The scratches on the case are something else and should not be there.
Since this is factory ammunition I would expect it to be within tolerance and should not be causing a difficult bolt close.
My advice is to contact AA immediately for corrective action.
Bob