Sloppy fitting lower.
|
Sloppy fitting lower.
|
|
01-04-2012, 07:55 AM
I usually hand-select my lower-to-upper fit from batches, so that I get a really tight gun. I don't like Accu-Wedges, since they increase the tension of the receivers away from each other, rather than towards. I have also gotten good initial results with Cerakote, since it adds surface thickness, but the guns will eventually shoot loose if you shoot alot, and use a lot of sling tension.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Sloppy fitting lower. - by K_Labs - 01-03-2012, 05:26 PM
Sloppy fitting lower. - by stokesrj - 01-03-2012, 08:19 PM
Sloppy fitting lower. - by Hektor - 01-04-2012, 04:18 AM
Sloppy fitting lower. - by LRRPF52 - 01-04-2012, 07:55 AM
Sloppy fitting lower. - by K_Labs - 01-04-2012, 08:59 AM
Sloppy fitting lower. - by stokesrj - 01-04-2012, 12:50 PM
Sloppy fitting lower. - by Drifter - 01-04-2012, 12:53 PM
Sloppy fitting lower. - by Jgloveracob - 01-07-2012, 06:27 PM
Sloppy fitting lower. - by Mutt - 01-09-2012, 04:37 AM
Sloppy fitting lower. - by sgt_murf - 01-15-2012, 03:21 PM
Sloppy fitting lower. - by rasp65 - 01-19-2012, 02:26 AM
Sloppy fitting lower. - by usmc1371 - 01-19-2012, 02:53 AM
Sloppy fitting lower. - by stokesrj - 01-19-2012, 03:03 AM
Sloppy fitting lower. - by stokesrj - 01-19-2012, 03:04 AM
Sloppy fitting lower. - by usmc1371 - 01-21-2012, 03:45 AM
Sloppy fitting lower. - by Deezil - 01-21-2012, 06:24 AM
Sloppy fitting lower. - by elkbow - 01-21-2012, 04:01 PM
Sloppy fitting lower. - by rasp65 - 01-22-2012, 08:09 PM
Sloppy fitting lower. - by elkbow - 01-23-2012, 01:45 AM
Sloppy fitting lower. - by jwilson1985 - 01-26-2012, 01:44 AM
|