Type II bolt on a Type 1 chamber

[NugginFutz]

That’s the kind of input i was looking for guys thanks.

To be honest the reason i asked is because against my better judgement I ordered a BHW 14.5” .264 LBC MLGS from true sporting arms. I have the feeling of regret now and wish I didn’t do it but the barrel has shipped so cancelling the order and/or returning it will be more of a hassle than the $140 it cost me. The regret is mostly on the fact that these barrels are head spaced with a .125” bolt face depth and thus bolt interchangeability between my grendels will not be viable. Not a huge deal, but I’ve got to figure out what bolt i’m gonna go with.

In your case, it is possible to use a finish reamer to deepen the headspace. (Assuming you crave it enough.)

On the other hand, if you want to continue with the barrel as-is, you can get the bolt from a number of places, including here:
https://www.tacticalammunition.com/264-L...8-0412.htm

ETA: FWIW, I have two BHW's, both headspace for .135", and both are fine barrels. Having a .125" headspace isn't the end of the world. Several members on this board have them and report few issues. Of course, YMMV.