04-03-2018, 01:32 AM
(This post was last modified: 04-03-2018, 01:37 AM by sneaky one.)
I removed the nitride coating from my own Faxon group buy bbl. extension. Dremel tool, and the red buffing- rubbing compound they sell, Dremel cone shaped felt tip.
It also removed the snake teeth scratches from side of brass upon extractions. you need to get in past the area where the bbl is connected to the extension- LRRPF52 calls it - the BBl. extension meltdown.
Nitride----- I was amazed how easy it came off...
It's not that tough. So maybe buff it off then ream the chamber again--- Only,,,, If they won't take it back. Just a backup idea.
Keep that ext. lubed with the best metal penatrants- if coatings are removed. Lube , and store -lubed.
Just another option..
It also removed the snake teeth scratches from side of brass upon extractions. you need to get in past the area where the bbl is connected to the extension- LRRPF52 calls it - the BBl. extension meltdown.
Nitride----- I was amazed how easy it came off...
It's not that tough. So maybe buff it off then ream the chamber again--- Only,,,, If they won't take it back. Just a backup idea.
Keep that ext. lubed with the best metal penatrants- if coatings are removed. Lube , and store -lubed.
Just another option..