Rem 700SA 6,5 Grendel project.

[Second]

Second,

Coming along nicely. Pity there is not an after-market bolt that fits the Grendel case otherwise I think there'd me more 700SA builds.

How did you keep the glue away from the two rail screw holes?
Did you do the forward section as well or only where there' a gap at the rear?
What's the curing time for that Loctite 2-part epoxy?

Klem

Since there is a coating on the rail the glue didn´t stuck in the holes that much. And I didn´t clean the holes with any aceton.
When the glue have cured for about 5 hour I took it loose. I used a standard drill and drilled the glue out of the holes with only fingerspeed, no drill. Just rolled the drill gently with my fingers.

I test mounted the rail first. Both the rear and then the front. The gap only appered on the back when the front screws were snugged down.

If i remember correct, the glue will be cured in about 15 minutes, but needs about 24 hour to be completely cured.