Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What presses and dies are you using and general equipment recommendations.
#61
You can get fairly accurate and consistent loads with a progressive, but there is significantly more QC in a singe stage, particularly when you are weighing each individual charge to be as consistent as possible. .1 grain of powder (if your charge thrower can stay that accurate) makes a hell of a difference at 400+ yards when you are trying to keep that sub MOA grouping going on, unless you found a velocity node that has the fluff room for that much discrepancy. EX - 27.3gr = 2460fps, 27.6gr = 2470 fps (normally 20-30 fps spread per .3 gr).

From my own experience on a progressive loading 5.56, the first 5 and the last 5 were the worst for inconsistencies in sizing, seating, and crimp since there were open slots on the shell plate, making a resistance and flex change.
Sticks

Catchy sig line here.
Reply


Messages In This Thread
What presses and dies are you using and general equipment recommendations. - by Sticks - 03-16-2018, 10:16 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)