03-09-2018, 07:51 PM
Who installed the gas block? It could be partially covering the port.
Your loads are less than max according to Sierra's data, although the RE10x load isn't that much low. Disclaimer: I haven't used either of these powders.
I did a build and misplaced the gas block (didn't read the directions all the way through) and had FTE's on lower power hand loads while factory ran fine.
Your loads are less than max according to Sierra's data, although the RE10x load isn't that much low. Disclaimer: I haven't used either of these powders.
I did a build and misplaced the gas block (didn't read the directions all the way through) and had FTE's on lower power hand loads while factory ran fine.