Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Classic Firearms Grendel Barrel Review.
#17
Randy99CL Wrote:I don't understand those giving the OP a hard time for making a chamber cast. It's the best way to get a look at the chamber and throat, why does it matter what the barrel costs?

Material costs $15 at Midway. It's reusable, melts at fairly low temp and is extremely accurate. https://www.midwayusa.com/product/100702...loy-1-2-lb

I'm buying some and making casts of all my guns, why not?
For example, I'll be able to see the differences between the chambers in my target 10/22s and my regular 10/22.


Thanks. I don't understand why someone wouldn't want to make a cast. $12 delivered to your door, stuff a cleaning patch in the bore, melt it with a heatgun in a minute or so, and pour it in. It gives you a great look at your chamber and helps in bullet seating.

For the, "you learned a lesson buying junk" crowd, here's a cast from a premium "hand-lapped match-grade" barrel I bought before I tried this cheapo Classic Firearms barrel. This AR barrel cost waaay more than the CF barrel and the group buy barrels offered here. You can put a straightedge on the cartridge and see the barrel bore misalignment.



[Image: i-kkbqhwv-L.jpg]
[Image: i-8z9pVJT-L.jpg]



I also did a chamber cast for my brother's $99 Anderson Grendel barrel. It looks good and shoots into an inch @ 100 with stuff it likes.
Also chamber cast a .223 cheapo JSE barrel and a PSA .223. Look good. JSE barrel shoots under an inch with ease. Never shot the PSA barrel.
And I've cast a number of non-AR rifles. I've never seen any crooked chambering like this.

If you don't want to buy Cerrosafe, use some soft lead and make an impact cast. Here's one for a 30-30 I did when I was experimenting with cast bullets.


[Image: i-KvJWjG7-L.jpg]


So this year I'm two for two on getting bad AR barrels. One expensive and one cheap. I'm going to continue to inspect, measure, and test whatever I get.

But back to the original topic. I presented the facts about a barrel I purchased from Classic Firearms and my subsequent customer service experience. I'm still awaiting an email response about why I didn't get a full refund. Hopefully someone finds my info useful when making a decision.
Reply


Messages In This Thread
Classic Firearms Grendel Barrel Review. - by klr - 03-06-2018, 10:09 PM
Classic Firearms Grendel Barrel Review. - by klr - 03-07-2018, 02:21 AM
Classic Firearms Grendel Barrel Review. - by Keef - 03-07-2018, 02:25 PM
Classic Firearms Grendel Barrel Review. - by Keef - 03-07-2018, 07:57 PM
Classic Firearms Grendel Barrel Review. - by klr - 03-07-2018, 10:33 PM
Classic Firearms Grendel Barrel Review. - by klr - 03-08-2018, 03:08 AM
Classic Firearms Grendel Barrel Review. - by klr - 03-08-2018, 04:18 AM
Classic Firearms Grendel Barrel Review. - by klr - 03-08-2018, 04:42 AM
Classic Firearms Grendel Barrel Review. - by 98Z - 03-08-2018, 05:57 AM
Classic Firearms Grendel Barrel Review. - by Keef - 03-08-2018, 01:46 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)