02-23-2018, 01:11 AM
That looks great.
What gas block did you use?
Did you measure your port?
The Satern 18" fluted cut rifled barrel I had was drilled with a .094" port, which needed a PRI adjustable gas block to choke it so it would run reliably.
With the adjustment screw almost completely closing the port off and with a rifle buffer and spring in a rifle RET, it still ran pretty hard.
What gas block did you use?
Did you measure your port?
The Satern 18" fluted cut rifled barrel I had was drilled with a .094" port, which needed a PRI adjustable gas block to choke it so it would run reliably.
With the adjustment screw almost completely closing the port off and with a rifle buffer and spring in a rifle RET, it still ran pretty hard.
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com