12-05-2017, 11:07 PM
I doubt seriously if the barrel can be re-chambered. If I understand the dimensioning correctly, the 0.125 bolt face-style chamber is already 0.011 too deeply cut into the barrel to be able to accept a 0.136. If you don't want to stick with that barrel you'll need to get another that is set to accept 0.136 depth bolts. Check the stickies on the grendel chamber as described above.
There are, as Dcc stated, many good, well-priced barrels out there. Depending on how Model1 assembled its upper you may be able to use the other pieces/parts.. Or get a different, completely-assembled upper with the appropriate barrel.
There are, as Dcc stated, many good, well-priced barrels out there. Depending on how Model1 assembled its upper you may be able to use the other pieces/parts.. Or get a different, completely-assembled upper with the appropriate barrel.
"Down the floor, out the door, Go Brandon Go!!!!!"