09-13-2017, 03:24 PM
When I polish the mating surfaces of the trigger and hammer, I just use a cotton buffer wheel with polishing compound.
I would never consider using sand paper, as that is way aggressive to a hardened surface.
Bobbing the hammer is pretty normal, not a big deal for me on several trigger jobs dating back to 2003.
Reduced power hammer springs are a major cause of light strikes, especially in cold weather. I would expect to see light strikes with the steel case ammo, so just watch for that if you don't replace with a full power hammer spring.
The reduced springs for the disconnector and trigger return are fine, as long as the FCG passes the function test.
For the price of the LaRue MBT-2S, there is less and less incentive to mess with trigger jobs nowadays.
I would never consider using sand paper, as that is way aggressive to a hardened surface.
Bobbing the hammer is pretty normal, not a big deal for me on several trigger jobs dating back to 2003.
Reduced power hammer springs are a major cause of light strikes, especially in cold weather. I would expect to see light strikes with the steel case ammo, so just watch for that if you don't replace with a full power hammer spring.
The reduced springs for the disconnector and trigger return are fine, as long as the FCG passes the function test.
For the price of the LaRue MBT-2S, there is less and less incentive to mess with trigger jobs nowadays.
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com