6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Troubleshooting v
Chamber Question

Linear Mode
Chamber Question
mac37
Unregistered
 
#8
11-27-2011, 05:08 PM
LR55,
I think you got it. It makes sense that the chamber is cut too deep. The Lapua case is set too deep in the chamber not only for the firing pin to reach but even for the extractor to pick up. As for the necks, all the fired cases measure between .298 and .300. So, it seems that the throat is .300 and the chamber is cut ~.008-.010 too deep. Could the AA bolt in an LBC chamber contribute to this? I read AA uses their own spec bolt and they will not work with other mfg's barrels and correctly headspace.

Thanks for all the help!
Reply


Messages In This Thread
Chamber Question - by mac37 - 11-26-2011, 02:49 AM
Chamber Question - by RangerRick - 11-26-2011, 04:35 AM
Chamber Question - by mac37 - 11-26-2011, 06:12 AM
Chamber Question - by brickcues - 11-27-2011, 03:56 AM
Chamber Question - by mac37 - 11-27-2011, 05:34 AM
Chamber Question - by LR1955 - 11-27-2011, 01:20 PM
Chamber Question - by bwaites - 11-27-2011, 03:11 PM
Chamber Question - by mac37 - 11-27-2011, 05:08 PM
Chamber Question - by RangerRick - 11-27-2011, 06:57 PM
Chamber Question - by mac37 - 11-27-2011, 08:58 PM
Chamber Question - by RangerRick - 11-28-2011, 03:37 AM
Chamber Question - by Variable - 11-28-2011, 02:24 PM
Chamber Question - by pinzgauer - 11-29-2011, 04:41 AM
Chamber Question - by mac37 - 11-29-2011, 07:14 AM
Chamber Question - by LR1955 - 11-29-2011, 12:56 PM
Chamber Question - by mac37 - 11-29-2011, 04:24 PM
Chamber Question - by Bill Alexander - 11-29-2011, 06:22 PM
Chamber Question - by mac37 - 12-03-2011, 02:50 AM
Chamber Question - by scottmilk9 - 12-05-2011, 03:49 AM
Chamber Question - by RangerRick - 12-06-2011, 04:35 AM
Chamber Question - by bwaites - 12-06-2011, 04:53 AM
Chamber Question - by RangerRick - 12-06-2011, 04:57 AM
Chamber Question - by RangerRick - 12-06-2011, 05:23 AM
Chamber Question - by bwaites - 12-06-2011, 05:33 AM
Chamber Question - by RangerRick - 12-06-2011, 05:46 AM
Chamber Question - by RangerRick - 12-06-2011, 06:41 AM
Chamber Question - by scottmilk9 - 12-06-2011, 07:34 PM
Chamber Question - by bwaites - 12-06-2011, 08:03 PM
Chamber Question - by scottmilk9 - 12-07-2011, 01:14 AM
Chamber Question - by Greyfox - 12-30-2011, 03:39 PM
Chamber Question - by mac37 - 01-13-2012, 04:34 AM
Chamber Question - by stokesrj - 01-13-2012, 05:06 AM
Chamber Question - by mac37 - 01-14-2012, 12:48 AM
Chamber Question - by bwaites - 01-14-2012, 12:59 AM
Chamber Question - by mac37 - 01-14-2012, 01:48 AM
Chamber Question - by Mutt - 01-15-2012, 03:39 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)