Accuracy fixed.

[just_john]

Klem, there is no issue with a little loctite on the face of the receiver. The point of lapping and loctiting is to facilitate a "single piece of metal" barrel thru receiver. If there is a little loctite on the face ( after cleaning off the excess), when the barrel nut is torqued down, it just helps to insure that there is no slack anywhere between the barrel and receiver. If there is any space or gap anywhere in this transitional area, there is opportunity for movement at ignition which creates an upredictable shot to shot variation. Just remember that if a little loctite is a good thing, a lot of it isn't!