Here's my first Grendel build
[ATTACH=CONFIG]9119[/ATTACH][ATTACH=CONFIG]9120[/ATTACH][ATTACH=CONFIG]9121[/ATTACH]
And the parts list:
Rifle weighs just a hair under 10 pounds with scope, without bipod and without a mag.
Muzzle velocities with factory hornady ELD-M at 56 degree F were between 2470 and 2510 FPS for the first 130 shots through this 20" odin works barrel.
Shoots awesome with E-Lander 10 round mags and hornady ELD Match. I think the 100 yard groups are about 1 MOA. Next time I get out to the range I'll dial in zero to perfection and shoot some groups. After zeroing, (as much as I could see through my scope and in the rain) I calculated for a 610 yard shot with strelok pro and hit 15" steel first shot! It was giggly fun plinking 15"round steel at 610 yards (doped 16.75MOA)! I think it it has less recoil than my carbine 16" 5.56 AR.
All in all, super happy with my second AR build ever.
Robert
[ATTACH=CONFIG]9119[/ATTACH][ATTACH=CONFIG]9120[/ATTACH][ATTACH=CONFIG]9121[/ATTACH]
And the parts list:
- Odin Works 6.5 Grendel 20" DMR barrel (bedded with rocksett) with matching odin works BCG
- Precision armament M4-72 .308 muzzle brake(installed with brownells shims and rocksett)
- Odin Works clamp-on adjustable gas block (bedded with rocksett)
- Aero Precision upper without FA (lapped front face)
- ALG 15" handguard
- 80% forged Cerro lower
- Geissele SSA/E trigger
- KNS gen G pins
- V Seven titanium pivot pin, take down pin, buffer retainer, grip screw, mag catch and ambi safety
- V Seven lightened steel bolt catch
- DPMS standard rifle buffer tube and buffer
- JP enhanced buffer spring and one piece spiral gas ring
- Magpul fixed rifle stock
- Warne 20MOA scope mount
- SWFA SS 3-15 FFP MOA scope
- SWFA scope level bubble
- Butler Creek scope caps
- BCM ambi charging handle
- Tip top 6-9 bipod
- Odin Works bipod mount
- Strike Industries ejection port cover and CA compliant grip
- Magpul aluminum trigger guard
Rifle weighs just a hair under 10 pounds with scope, without bipod and without a mag.
Muzzle velocities with factory hornady ELD-M at 56 degree F were between 2470 and 2510 FPS for the first 130 shots through this 20" odin works barrel.
Shoots awesome with E-Lander 10 round mags and hornady ELD Match. I think the 100 yard groups are about 1 MOA. Next time I get out to the range I'll dial in zero to perfection and shoot some groups. After zeroing, (as much as I could see through my scope and in the rain) I calculated for a 610 yard shot with strelok pro and hit 15" steel first shot! It was giggly fun plinking 15"round steel at 610 yards (doped 16.75MOA)! I think it it has less recoil than my carbine 16" 5.56 AR.
All in all, super happy with my second AR build ever.
Robert