Problems with New 6.5 Grendel Upper Build

[DJudge]

Thanks for all of the replies and here is what I have tried so far. I cleaned the barrel after each of the first five rounds, then every five, then every ten and again before trying the Hornady ammo. Tried taking the upper off and dropping the Wolfs into the chamber by hand and turning barrel up and they drop out. Tried dropping each of the Hornady rounds into the chamber by hand and turning it upside down and the rounds will not come out even by bumping it. Run the cleaning rod into the barrel and lightly tap them and they come out. Tried marking the bullets and there appears to be a ring less than 1/8" from the casing on the bullet like it is engaging the lands.

I'll try to contact Alexander Arms. Wondering if this is a fluke or if anyone else is having this issue? Was it not machined correctly or what... Thanks in advance...