04-13-2017, 07:54 PM
LR1955 Wrote:Guys:
We as Mods will not stop or criticize anyone for posting relevant information about their Grendel to the forum. The OP was polite in his posting and simply stated what was going on so others who may have had the same experience can give him advice.
If you want us to censor guys who post things critical of AA then we will have to do the same for anyone who is critical of any manufacturer.
We have many guys who had big problems with their Grendel related products, from AA through PF, through Les Bear. As long as they remain polite and professional, they can post what they want.
In fact, probably one of the better things in the Grendel Forums is that guys can post problems without concern. Sometimes when enough of the same issue comes up, Alexander has noted it and made changes.
So, if you guys think someone is getting out of hand about it, write one of us and we will take a look.
No big deal.
LR55
I didn't call manufacturer because I was not sure the barrel was %100 short chambered and I didn't know if someone would suggest something that could be done to fix the issue , without me having to tear it apart ,ship it back and put it back together. Going from previous post it seemed likely my barrel is short chambered as the hornady rounds stick, wolf ammo doesn't. I also didn't notice any high pressure signs so I didn't know if I could shoot another 200 rounds and the chamber would open up a bit or if it was unsafe and it should be sent back right away. Which is why I was asking.
But I did also add that maybe the grendel 2 chamber wasn't as bad as people have made it out to be because there seems to be a lot of post around about people getting short chambered saami barrels. From what I gather the saami spec is best but it must be much harder to make barrels that are in spec with the compound throat.