03-29-2017, 04:33 PM
Gas ports are usually anywhere from .062" to .094".
Anytime I start a build, I now measure the gas port and record that. I recommend everyone do this, in addition to checking that factory cartridges or your intended hand loads fall freely from the chamber after a full seat.
Build doesn't start unless those 2 areas are covered.
Anytime I start a build, I now measure the gas port and record that. I recommend everyone do this, in addition to checking that factory cartridges or your intended hand loads fall freely from the chamber after a full seat.
Build doesn't start unless those 2 areas are covered.
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
