03-20-2017, 02:42 PM
So the fired case gets stuck in the chamber, and the bolt runs back and picks up anouther round.
Maybe there is a extractor issue on your bolt.
You said you checked the fired case to see if it was stuck and it checked out as you said it floated, so I'm thinking the extractor itself isn't working properly.
Do you have a heavier buffer you could try.
I could be completely wrong but you never know.
Maybe there is a extractor issue on your bolt.
You said you checked the fired case to see if it was stuck and it checked out as you said it floated, so I'm thinking the extractor itself isn't working properly.
Do you have a heavier buffer you could try.
I could be completely wrong but you never know.