Im hoping the sbr is at least as quiet as my buddy's with the same barrel and the specwar can, I'll try to make a video of them shooting side by side next time we go shooting. I've shot it a few times with subsonic ammo and it's louder than my suppressed p226, but not by much.
I cerakoted it last night, here are some pictures I took while putting it back together:
Here's the SBR rear cap, it's just a slip fit over the tube with a hole drilled for the gas tube. The rifle rear caps are threaded and screw into the inside of the tube.
![[Image: 20161106_190724.jpg]](https://s21.postimg.org/syr5rm1o7/20161106_190724.jpg)
The tube then goes to the muzzle attachment, which is threaded on both sides and has holes drilled into it to let the gas get into the rear section:
![[Image: 20161106_190641.jpg]](https://s21.postimg.org/5tk48czfr/20161106_190641.jpg)
The actual silencer section threads onto the front of the muzzle attachment and has 8 baffles in front of a titanium spacer. Very similar to the silencerco saker 7.62 pictured below but without a brake inside
![[Image: XTXVdhw.jpeg]](http://i.imgur.com/XTXVdhw.jpeg)
I cerakoted it last night, here are some pictures I took while putting it back together:
Here's the SBR rear cap, it's just a slip fit over the tube with a hole drilled for the gas tube. The rifle rear caps are threaded and screw into the inside of the tube.
The tube then goes to the muzzle attachment, which is threaded on both sides and has holes drilled into it to let the gas get into the rear section:
The actual silencer section threads onto the front of the muzzle attachment and has 8 baffles in front of a titanium spacer. Very similar to the silencerco saker 7.62 pictured below but without a brake inside