[ATTACH=CONFIG]8140[/ATTACH]Range Report. Could not stand it so jetted over there and shot in between rain storms. FDE rifle cycles and shoots great, black one shoots great but does not cycle. The FDE has a JP Scapture Spring in it and is a heck of a lot smoother. The black one regular buffer and spring and it is a clangy noisy thing compared to the JPSCS. I will take the black gas block down and pin it with the positioning plastic pins and call it good and put a JPSCS in that one also and the problem should and will be solved. Now mind you in a hurry with a 4x16x44 non expensive scope firing as fast as I can between down pours. These little rifles are very accurate and will get better when I get some more rounds down the tubes. SO,,,,,,,,, Bottom left of the bullseye is the FDE one fully functional at 100 yards. Bottom right of the page is the black one single shooten it at 50. Tried to adjust the block but no difference and I should have put the JPSCS in the black one but was in a hurry and thankful that everything worked great and I did not blow my self up!!!
Lined the black one up just like I did the FDE so I am thinking it is the buffer and regular spring but will use the pin in it and like I said put a JPSCS in that one also. Those are just way way so much smoother and do not bang the shoulder so much. BANG BANG!!
Already realigned the GB and it went back to where I had it so it is good to go with the addition of the JPSCS system to it. Makes a heck of a difference.
Lined the black one up just like I did the FDE so I am thinking it is the buffer and regular spring but will use the pin in it and like I said put a JPSCS in that one also. Those are just way way so much smoother and do not bang the shoulder so much. BANG BANG!!Already realigned the GB and it went back to where I had it so it is good to go with the addition of the JPSCS system to it. Makes a heck of a difference.