07-13-2016, 03:16 PM
Best thing to do is call them directly.
Ask if they have a reamer cut to SAAMI specs. If so, go with it.
If not, and you are happy with the description and drawing if they send a copy, then go for it. Just remember that you will have to work a little harder to get the best accuracy from the barrel. Some claim that the "best accuracy" from a "match chamber" is better than one gets from a SAAMI chamber.
The difference in accuracy potential, if any, is so slight that one rarely sees better performance than with the SAAMI spec chamber. The reason is that the 0.5 degree taper in the SAAMI throat (where the freebore normally is) gets excellent alignment and tolerates larger jumps than the typical 1.5 degree "target throat and conventional freebore do.
Ask if they have a reamer cut to SAAMI specs. If so, go with it.
If not, and you are happy with the description and drawing if they send a copy, then go for it. Just remember that you will have to work a little harder to get the best accuracy from the barrel. Some claim that the "best accuracy" from a "match chamber" is better than one gets from a SAAMI chamber.
The difference in accuracy potential, if any, is so slight that one rarely sees better performance than with the SAAMI spec chamber. The reason is that the 0.5 degree taper in the SAAMI throat (where the freebore normally is) gets excellent alignment and tolerates larger jumps than the typical 1.5 degree "target throat and conventional freebore do.
shootersnotes.com
"To those who have fought and almost died for it, freedom has a flavor the protected will never know."
-- Author Unknown
"If at first you do succeed, try not to look astonished!" -- Milton Berle
"To those who have fought and almost died for it, freedom has a flavor the protected will never know."
-- Author Unknown
"If at first you do succeed, try not to look astonished!" -- Milton Berle