07-07-2016, 01:31 AM
I can help some on your questions sir.
I beded my barrel to my receiver and yes all you do is put the lock tite on the barrel extention, put barrel in tighten down barrel nut and then wipe the extra lock tite from the barrel extention inside the receiver.
I also beded the gas block and gastube. It helps with gas leaks and from what I was told makes the rifle easyer to set with a adjustable gas block.
Put blue lock tite around gas tube where it goes in to the gas block and put red lock tite around the gas port in barrel in a semi circle, leaving a gap on the muzzle side of gas port so you dont push any in to the gas port when installing gas block.
I used a jp split yoke adjustable gas block so I was able to put a full ring of red lock tite around gas port but this type of gas block is not a have to have other gas blocks will work I just choose this one because I like the design and anything made by JP.
Hope this info helps sir and that you can understand it. Others will be along shortly with more advice and knowledge then me.
I beded my barrel to my receiver and yes all you do is put the lock tite on the barrel extention, put barrel in tighten down barrel nut and then wipe the extra lock tite from the barrel extention inside the receiver.
I also beded the gas block and gastube. It helps with gas leaks and from what I was told makes the rifle easyer to set with a adjustable gas block.
Put blue lock tite around gas tube where it goes in to the gas block and put red lock tite around the gas port in barrel in a semi circle, leaving a gap on the muzzle side of gas port so you dont push any in to the gas port when installing gas block.
I used a jp split yoke adjustable gas block so I was able to put a full ring of red lock tite around gas port but this type of gas block is not a have to have other gas blocks will work I just choose this one because I like the design and anything made by JP.
Hope this info helps sir and that you can understand it. Others will be along shortly with more advice and knowledge then me.