Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My build in progress
#13
My barrel finally showed up. A Black Hole Weaponry stainless 16" 1-in-8 MLGS with the honeycomb fluting. I can finally put it together for real tomorrow.
[Image: 20160318_130151_zpsptdykrnf.jpg]
[Image: 20160318_130209_zpstudcmoxm.jpg]

Mock up
[Image: 20160318_164108_zpsza3grnex.jpg]

The barrel turned out to be a little heavier than I had expected, but still OK. Here it is except for the little screws for the handguard. I'll be changing a couple steel parts into titanium or aluminum in the future.
[Image: 20160318_163543_zpsnjcznxr2.jpg]
UT ALII VIVANT !!!
Reply


Messages In This Thread
My build in progress - by Beerswimmer - 02-01-2016, 09:23 PM
My build in progress - by Fredman - 02-01-2016, 10:14 PM
My build in progress - by Beerswimmer - 02-01-2016, 10:16 PM
My build in progress - by am4966 - 02-02-2016, 03:17 AM
My build in progress - by am4966 - 02-02-2016, 03:19 AM
My build in progress - by Beerswimmer - 02-02-2016, 04:06 AM
My build in progress - by LRRPF52 - 02-02-2016, 05:02 AM
My build in progress - by Slinkz - 02-02-2016, 04:44 PM
My build in progress - by Beerswimmer - 02-02-2016, 04:59 PM
My build in progress - by Beerswimmer - 02-04-2016, 07:08 PM
My build in progress - by Slinkz - 02-06-2016, 09:47 PM
My build in progress - by Beerswimmer - 02-06-2016, 10:16 PM
My build in progress - by Beerswimmer - 03-18-2016, 06:07 PM
My build in progress - by thedudeabides - 03-22-2016, 01:35 AM
My build in progress - by 762n40 - 03-23-2016, 01:08 AM
My build in progress - by Beerswimmer - 03-23-2016, 07:42 PM
My build in progress - by Beerswimmer - 03-23-2016, 07:43 PM
My build in progress - by Beerswimmer - 04-23-2016, 06:45 PM
My build in progress - by Moonshine44 - 05-04-2016, 10:48 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)