10-19-2015, 03:05 AM
That list is just one set of parameters that I use when doing a build.
The other involves bolt work, barrel extension de-edging and polishing of the feed ramps, and other hand-fitting tricks. I think Whitley has covered them as well.
The one about the gas tube is usually overlooked by most people when doing a build, but is especially difficult on the RLGS. MLGS and CLGS are much more stiff, with less room for things to go wrong, but RLGS has less port pressure, so is nicer on the action and cyclic rate.
You can build an extremely accurate AR15 that will smoke most of the bolt guns on the range if you follow that regimen in the article.
The other involves bolt work, barrel extension de-edging and polishing of the feed ramps, and other hand-fitting tricks. I think Whitley has covered them as well.
The one about the gas tube is usually overlooked by most people when doing a build, but is especially difficult on the RLGS. MLGS and CLGS are much more stiff, with less room for things to go wrong, but RLGS has less port pressure, so is nicer on the action and cyclic rate.
You can build an extremely accurate AR15 that will smoke most of the bolt guns on the range if you follow that regimen in the article.
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com