Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
TTSX OAL - Ogive Issue
#4
rasp65 Wrote:What are you using for an OAL gauge? I remember someone on the old site complaining about the length of TTSX bullets and pulling off the plastic tip so as not to loose powder space. I use the TSX and at mag length they are off the lands by more than .015".

I found a problem with my OAL gauge. Apparently the Grendel modified case won't take 120 gr bullets, which is stupid. I tried to use some tape to hold her still and not screwing the case gauge in so far. I have a call into Hornady to resolve it.
Reply


Messages In This Thread
TTSX OAL - Ogive Issue - by cornholio1 - 03-28-2011, 04:10 AM
TTSX OAL - Ogive Issue - by sloan - 03-28-2011, 10:20 AM
TTSX OAL - Ogive Issue - by rasp65 - 03-28-2011, 12:03 PM
TTSX OAL - Ogive Issue - by cornholio1 - 03-28-2011, 01:15 PM
TTSX OAL - Ogive Issue - by bwaites - 03-28-2011, 02:40 PM
TTSX OAL - Ogive Issue - by pinzgauer - 03-28-2011, 02:43 PM
TTSX OAL - Ogive Issue - by cornholio1 - 03-28-2011, 03:05 PM
TTSX OAL - Ogive Issue - by longdayjake - 03-28-2011, 03:53 PM
TTSX OAL - Ogive Issue - by cornholio1 - 03-28-2011, 04:04 PM
TTSX OAL - Ogive Issue - by CoolBarrelBill - 03-28-2011, 11:24 PM
TTSX OAL - Ogive Issue - by Hoot - 03-28-2011, 11:48 PM
TTSX OAL - Ogive Issue - by mseric - 03-29-2011, 12:33 AM
TTSX OAL - Ogive Issue - by Hoot - 03-29-2011, 02:04 AM
TTSX OAL - Ogive Issue - by longdayjake - 03-29-2011, 08:34 PM
TTSX OAL - Ogive Issue - by PA_Allen - 03-29-2011, 08:59 PM
TTSX OAL - Ogive Issue - by longdayjake - 03-29-2011, 09:52 PM
TTSX OAL - Ogive Issue - by mseric - 03-29-2011, 10:24 PM
TTSX OAL - Ogive Issue - by bwaites - 03-29-2011, 10:51 PM
TTSX OAL - Ogive Issue - by StoneTower - 03-29-2011, 10:55 PM
TTSX OAL - Ogive Issue - by mseric - 03-29-2011, 11:34 PM
TTSX OAL - Ogive Issue - by mseric - 03-29-2011, 11:38 PM
TTSX OAL - Ogive Issue - by bwaites - 03-29-2011, 11:53 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)