06-03-2015, 01:50 PM
NugginFutz Wrote:Well, it stands to reason that in order to block the gas flow, the setscrew needs to be at least the same diameter as the gas journal in the block.I figured even if the screw was smaller, then it would act like a partially opened adjustable block, impeding at least some of the gas. Also, 3mm gave me a little more wiggle room in case I messed something up... Obviously it didn't work out like I'd hoped... Worst case it doesn't work and I just fill in the hole, or leave it with the screw in and have to buy an adjustable one anyways... I'll update again once I get the bigger screw in and have a chance to try it out.