09-27-2011, 06:01 PM
That does not look like it is short stroking to me, it appears the bolt is going far enought to the rear to pick up the next cartridge, correct?
Two things come to mind here:
1) Proper ejector, meaning is it functioning as it should, proper depth?
or, more likely,
2) Extractor is catching the case rim and hanging on. Some extractors have such a sharp edge that they bite into the brass and hang on. A little emery cloth, or very gentle work with a dremel and fine sanding disk will fix this without a problem.
Two things come to mind here:
1) Proper ejector, meaning is it functioning as it should, proper depth?
or, more likely,
2) Extractor is catching the case rim and hanging on. Some extractors have such a sharp edge that they bite into the brass and hang on. A little emery cloth, or very gentle work with a dremel and fine sanding disk will fix this without a problem.
You seek escape from pain. We seek the achievement of happiness. You exist for the sake of avoiding punishment. We exist for the sake of earning rewards. Threats will not make us function; fear is not our incentive. It is not death that we wish to avoid, but life that we wish to live. - John Galt