My Smith in Wylie Texas should finish mine ln the next week or so. Will report on it when I get it and have a chance to shoot it. This is his first 527 to work on but his other work gives me full confidence.
The one he is working on is a CZ 7.62X39 to Grendel conversion
True and square action with Obermeyer barrel, turned down to just bigger than factory contour and spiral fluted finished at 22 inches. For now keeping the wood stock, free floated an bedded. For a little more length adding a Kickeez recoil pad. The chamber is cut to minimum SAAMI spec and he now has the reamer for that.
Before selecting him for a local gun smith to do the job, was considering the CZ custom shop or McGowen who will install one of their barrels. Chambered threaded barrels are available from Lothar Walther for the 527
The one he is working on is a CZ 7.62X39 to Grendel conversion
True and square action with Obermeyer barrel, turned down to just bigger than factory contour and spiral fluted finished at 22 inches. For now keeping the wood stock, free floated an bedded. For a little more length adding a Kickeez recoil pad. The chamber is cut to minimum SAAMI spec and he now has the reamer for that.
Before selecting him for a local gun smith to do the job, was considering the CZ custom shop or McGowen who will install one of their barrels. Chambered threaded barrels are available from Lothar Walther for the 527