And So It Begins.....

[LRRPF52]

I like the ALG Defesne triggers as well for a nice FCG basis when looking at a more economical FCG, but still wanting the best quality on the market. For those that don't know, it's a Geissele trigger, just standard AR15 spec without any 2-stage like the other top-dollar ones.

I recently bobbed the hammer on one, polished the trigger nose and hammer notch, which were already nicely polished for a rack-grade trigger, used a JP AR10 hammer spring, and established a very light, crisp, smooth trigger for one of my Grendel's.

I personally like JP single-stage triggers, which I have installed for the past 12 years now on many AR15's.

Since the 18" Brownell's barrels have such a large gas port, the adjustable gas key BCG will come in handy. I highly recommend the JP SCS. It's a smooth, strongly sprung and buffered recoil system that will balance out an 18" MLGS large port very well. It has more spring strength in that last area of the BCG going into battery from what I can tell, unlike the toilet paper roll recoil springs on the standard AR15. I really like it a lot.