03-03-2015, 03:10 AM
I have a rifle length gas system, and the gas port is whatever Alexander Arms puts on their 19.5 inch Shilen barrels. I don't really want to dismount the gas block just to measure the gas port if I can avoid it.
I tried seating bullets deeper into the case to see if that would reduce my flattened primers (written about in the reloading thread), and while one load showed a marked improvement in accuracy, another load got worse. Both loads are under max loads.
I tried seating bullets deeper into the case to see if that would reduce my flattened primers (written about in the reloading thread), and while one load showed a marked improvement in accuracy, another load got worse. Both loads are under max loads.