09-16-2011, 11:19 PM
Try bending thr lips of the mag up just a little. The idea is to get the tip of the top bullet in the mag to point up a little higher than it currently is.
Also, check your feed ramps. With the parts you have it shouldn't be a problem, but just in case... Scroll half way down the following web page to the pictures: http://www.warriortalk.com/showthread.ph...9-M4-Ramps
You really want the top right. Some lowers don't have the cuts for the M4 feed ramp. The good news is that you can do it yourself because the lower is aluminum and you can dremel it out pretty easily if you need to.
If they aren't right, though, just send em back.
RR
Also, check your feed ramps. With the parts you have it shouldn't be a problem, but just in case... Scroll half way down the following web page to the pictures: http://www.warriortalk.com/showthread.ph...9-M4-Ramps
You really want the top right. Some lowers don't have the cuts for the M4 feed ramp. The good news is that you can do it yourself because the lower is aluminum and you can dremel it out pretty easily if you need to.
If they aren't right, though, just send em back.
RR