Load testing for my CZ527
#16
LRRPF52 Wrote:I'm not going to advocate anyone push past a point they aren't comfortable with, but there are some barrels that will hit 2700fps with CFE and 123gr in the AR15.

Heck, Bwild97 got 2662fps with the 129gr SST from a 24" AR15 using 31.0gr of CFE.

I think 2700fps is child's play in a bolt gun with CFE and 123gr. Some barrels will produce more speed than others. I would be happy with a 20" in the mid-2500fps range though, especially in an accuracy node.

If I remember correctly the CFE223/123gn MAX load was also provided by Bwild97 in Volume 2. The loads were all sub-moa (eyeballed at about ¾") with some left over Sierras, not my preferred projectile, but "waste not, want not." Having seen no signs of excessive pressure, I will repeat the loads with some A-MAXs or pointed 123gn Scenars.
Reply


Messages In This Thread
Load testing for my CZ527 - by Buck2732 - 11-04-2014, 10:06 AM
Load testing for my CZ527 - by SHORT-N-SASSY - 11-04-2014, 12:16 PM
Load testing for my CZ527 - by Buck2732 - 11-04-2014, 01:49 PM
Load testing for my CZ527 - by SHORT-N-SASSY - 11-04-2014, 04:18 PM
Load testing for my CZ527 - by LRRPF52 - 11-04-2014, 05:19 PM
Load testing for my CZ527 - by NugginFutz - 11-04-2014, 09:14 PM
Load testing for my CZ527 - by Nukes - 11-05-2014, 05:18 AM
Load testing for my CZ527 - by Nukes - 11-05-2014, 05:21 AM
Load testing for my CZ527 - by LRRPF52 - 11-05-2014, 04:49 PM
Load testing for my CZ527 - by Variable - 11-05-2014, 11:35 PM
Load testing for my CZ527 - by Buck2732 - 11-07-2014, 08:47 PM
Load testing for my CZ527 - by Nukes - 11-17-2014, 12:05 AM
Load testing for my CZ527 - by LRRPF52 - 11-17-2014, 05:44 PM
Load testing for my CZ527 - by Nukes - 11-17-2014, 07:02 PM
Load testing for my CZ527 - by LRRPF52 - 11-17-2014, 07:21 PM
Load testing for my CZ527 - by Nukes - 11-17-2014, 08:19 PM
Load testing for my CZ527 - by Buck2732 - 11-20-2014, 11:09 AM
Load testing for my CZ527 - by kmon - 02-11-2015, 11:21 PM
Load testing for my CZ527 - by LRRPF52 - 02-12-2015, 12:33 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)