07-12-2011, 07:45 PM
This is a close up of the receivers used for the Templar Consulting LLC MWCS (Multi Caliber Weapon System)
![[Image: TemplarcustomMCWS.jpg]](http://i117.photobucket.com/albums/o42/warped60120/TemplarcustomMCWS.jpg)
Here are some of the details in this build:
MCWS "Multi Caliber Weapons System"
- Templar forged lower and matched upper 7075 T6 forgings
- M16 bolt carrier
- Bolt matched to 5.56 Wylde chamber
- Bolt matched to 6.5 Grendel chamber (also works with Beowulf)
- 16" 416 Stainless steel button rifle barrel .50 Beowulf Barrel 1/20 twist Alexander Arms
- 16" 4140 Chromoly Vanadium steel button rifle barrel 5.56 Wylde chamber 1/8 twist (Templar Custom)
- 16" 416 Stainless steel button rifle 6.5 Grendel 1/8 (Templar Custom)
- Stainless WCI muzzle brakes for all three calibers 5.56, 6.5 Grendel, .50 Beowulf
- Magpul ACS stock
- Ergo Ambi grip
- Geissle Automatic SSA trigger
- PRI low pro co witness sights
- Eotech 556.A65/1 (additional cost of $575)
- Multi caliber cleaning kit
- Hard or soft case (buyers choice)
14" Templar FastRail system:
- Extruded 6061 T111 aircraft grade aluminum
- Center is counter-bored to ensure exact concentricity and alignment with mil standard uppers
- 14" hand guard weighs in at 18oz
- 43-45RC 3 black oxidized Templar barrel nut "3 for this configuration"
- 1 swivel sling stud
- 1 case hardened black oxide barrel tool and 5/32 allen wrench
Shown Here is the Paint Scheme: Desert Snake (Templar Custom) (others upon request) (additional cost for patterns or more than one color)
Bob Reynolds
104 Buttermilk Way
Apex, NC 27502
Cell: 1- 919-757-7085
Office: 1- 877-878-2334
bobjr@templarconsultingllc.com
Templarconsultingllc.com
Look for the upcoming Article in Shooting Times!
Here are some of the details in this build:
MCWS "Multi Caliber Weapons System"
- Templar forged lower and matched upper 7075 T6 forgings
- M16 bolt carrier
- Bolt matched to 5.56 Wylde chamber
- Bolt matched to 6.5 Grendel chamber (also works with Beowulf)
- 16" 416 Stainless steel button rifle barrel .50 Beowulf Barrel 1/20 twist Alexander Arms
- 16" 4140 Chromoly Vanadium steel button rifle barrel 5.56 Wylde chamber 1/8 twist (Templar Custom)
- 16" 416 Stainless steel button rifle 6.5 Grendel 1/8 (Templar Custom)
- Stainless WCI muzzle brakes for all three calibers 5.56, 6.5 Grendel, .50 Beowulf
- Magpul ACS stock
- Ergo Ambi grip
- Geissle Automatic SSA trigger
- PRI low pro co witness sights
- Eotech 556.A65/1 (additional cost of $575)
- Multi caliber cleaning kit
- Hard or soft case (buyers choice)
14" Templar FastRail system:
- Extruded 6061 T111 aircraft grade aluminum
- Center is counter-bored to ensure exact concentricity and alignment with mil standard uppers
- 14" hand guard weighs in at 18oz
- 43-45RC 3 black oxidized Templar barrel nut "3 for this configuration"
- 1 swivel sling stud
- 1 case hardened black oxide barrel tool and 5/32 allen wrench
Shown Here is the Paint Scheme: Desert Snake (Templar Custom) (others upon request) (additional cost for patterns or more than one color)
Bob Reynolds
104 Buttermilk Way
Apex, NC 27502
Cell: 1- 919-757-7085
Office: 1- 877-878-2334
bobjr@templarconsultingllc.com
Templarconsultingllc.com
Look for the upcoming Article in Shooting Times!