12-31-2023, 09:37 PM
Diane, curious if those groups are from your Uintah. I see similar groups from my Uintah with 120 SMKs over 27.8gr of Tac. What velocity are you getting with your load?
|
100 yard groups with TAC powder...
|
|
12-31-2023, 09:37 PM
Diane, curious if those groups are from your Uintah. I see similar groups from my Uintah with 120 SMKs over 27.8gr of Tac. What velocity are you getting with your load?
01-02-2024, 12:43 AM
Wethepeople Wrote:Diane, curious if those groups are from your Uintah. I see similar groups from my Uintah with 120 SMKs over 27.8gr of Tac. What velocity are you getting with your load?Yes, the groups are with the Uintah... The velocity's are right around 2480 fps...
01-23-2024, 08:29 PM
dianeb Wrote:for some reason tac powder has been preforming very good for me... nice shooting and great work on the load. Timitus Wrote:nice shooting and great work on the load. Thanks, I started out with 27.1, 27.4, and 27.7 was the magic load for my rifle... With 28.2 grains my groups started to open up...
01-24-2024, 01:56 AM
Barrel length? Tac is similar to AR Comp?, this is good news since AR Comp is as rare as a living Clinton witness.
Rugerfan.64 Wrote:Barrel length? Tac is similar to AR Comp?, this is good news since AR Comp is as rare as a living Clinton witness. 22 inch barrel... The burn rate is almost the same as AR COMP... Tac is getting hard to find...
01-24-2024, 02:50 AM
Typical, I may have to it out. Thanks. With my daughters 24" barrel she might get a fuzz closer to 2500, which is a little slower than our AR Comp load, still doable.
01-24-2024, 06:30 PM
Now that I'm done with my 6.5 Grendel load workups I've been working on my 300 Blackout loads and have found 2 awesome loads for it...
110gr Barnes TAC-TX, W296 19.6 grains OAL 2.250 velocity 2417 FPS SD 9.7... Same bullet and OAL W296 19.9 grains velocity 2429 FPS SD 4.9... The other day I put 10 rounds at 100 yards a hair less than 1inch... I will be hunting pigs with it
01-26-2024, 12:53 AM
DIANEB Wrote:Now that I'm done with my 6.5 Grendel load workups I've been working on my 300 Blackout loads and have found 2 awesome loads for it...Curious, why the choice to use the 300 blackout on pigs, rather than the 6.5 Grendel?
From my cold dead endmill...
|
|
« Next Oldest | Next Newest »
|