First 6.5 AR Build - Thank You!

[TapRackBang]

I want to thank you all for the recommendations on the barrel. It kills me that I haven't shot it yet, but soon.

This site is a fantastic resource and I've benefitted greatly. Much obliged.

[VASCAR2]

Looks great, I’m in for the range report.

[PrecisionFirearms]

I didnt realize this was your barrel that we made LOL! When I saw the fluting I was like that looks like our fluting and then I figured it out. Let me know how it shoots for you!

Mark Hostetter

Precision and Samurai Firearms

[LRRPF52]

That’s a sick build. Give us the run-down.

[TapRackBang]

I didnt realize this was your barrel that we made LOL! When I saw the fluting I was like that looks like our fluting and then I figured it out. Let me know how it shoots for you!

Mark Hostetter

Precision and Samurai Firearms

Yes, sir! Barrel looks great! I'm excited to try it out. Once I can find some decently priced quality ammo. Anything you'd recommend? Something in the 120-123 grain territory? I plan to reload for best results, but do you recommend any particularly well performing good off the shelf options?

That’s a sick build. Give us the run-down.

Thank you!

Here's the build list:

Lower Receiver: American Defense Manufacturing ADM4
Upper Receiver: VLTOR MUR
Barrel: 18", ILGS Precision Firearms chambered and fluted Criterion
Handguard: JL Billet AR15 17" Angle Cut M-Lok
BCG: JP Enterprises FMOS Bolt Carrier Group with JP EnhancedBolt
Gas Block: SLR Rifleworks GB7 Titanium Micro Gas Block (non-adjustable)
Muzzle Brake: SLR Rifleworks Synergy Mini Comp 30 Cal
Trigger: Geissele SD-E
Charging Handle: Geissele Airborne
Safety Selector: Radian Talon 45/90 (Installed as 45)
Grip: Magpul MOE K2+
Receiver Extension, Endplate, Ratcheting Castle Nut: Primary Weapon Systems
Buffer: Geissele Super 42 Braided Wire Buffer Spring and Buffer Combo, H2
Buttstock: Daniel Defense Collapsible
Takedown/Pivot Pins: Forward Controls Design PF-040
Mag Release Button: Geissele Ultra Duty
Scope: NX8 – 2.5-20x50mm F1, Mil-XT Reticle
Scope Mount: Scalarworks LEAP Scope Mount, 30mm, 1.57in
Canted Optic: Trijicon RMR Type 2, RM09 1 MOA
Canted Optic Mount: Arisaka Defense Offset Optic Mount
Light: Modlite OKW, Surefire DS00 Tailcap
Switch: Modlite ModButton Lite 7" (Unity Tactical)
Light Mount: Arisaka Defense Offset Scout Mount
Vertical Grip: Railscales RSB/M
Grip Panels: Railscales XOS, XOS-H
Sling Mount: Arisaka QD
Sling: Ferro Concepts Slingster
Sling Keeper: Neomag Sentry Strap

I think that's everything short of detents and springs. Happy to answer questions!

EDIT: One more thing! Cable management. Arson Machine Picatinny WireGuide System. No more zip ties. They're excellent!

[TapRackBang]

I didnt realize this was your barrel that we made LOL! When I saw the fluting I was like that looks like our fluting and then I figured it out. Let me know how it shoots for you!

Mark Hostetter

Precision and Samurai Firearms

Yes, sir! Barrel looks great! I'm excited to try it out. Once I can find some decently priced quality ammo. Anything you'd recommend? Something in the 120-123 grain territory? I plan to reload for best results, but do you recommend any particularly well performing good off the shelf options?

That’s a sick build. Give us the run-down.

Thank you!

Here's the build list:

Lower Receiver: American Defense Manufacturing ADM4
Upper Receiver: VLTOR MUR
Barrel: 18", ILGS Precision Firearms chambered and fluted Criterion
Handguard: JL Billet AR15 17" Angle Cut M-Lok Handguard
BCG: JP Enterprises FMOS Bolt Carrier Group with JP EnhancedBolt
Gas Block: SLR Rifleworks GB7 Titanium Micro Gas Block (non-adjustable)
Muzzle Brake: SLR Rifleworks Synergy Mini Comp 30 Cal
Trigger: Geissele SD-E
Charging Handle: Geissele Airborne
Safety Selector: Radian Talon 45/90 (Installed as 45)
Grip: Magpul MOE K2+
Receiver Extension, Endplate, Ratcheting Castle Nut: Primary Weapon Systems
Buffer: Geissele Super 42 Braided Wire Buffer Spring and Buffer Combo, H2
Buttstock: Daniel Defense Collapsible
Takedown/Pivot Pins: Forward Controls Design PF-040
Mag Release Button: Geissele Ultra Duty
Scope: Nightforce NX8 2.5-20x50mm F1, Mil-XT Reticle
Scope Mount: Scalarworks LEAP Scope Mount, 30mm, 1.57in
Canted Optic: Trijicon RMR Type 2, RM09 1 MOA
Canted Optic Mount: Arisaka Defense Offset Optic Mount
Light: Modlite OKW, Surefire DS00 Tailcap
Switch: Modlite ModButton Lite 7" (Unity Tactical)
Light Mount: Arisaka Defense Offset Scout Mount
Vertical Grip: Railscales RSB/M
Grip Panels: Railscales XOS, XOS-H
Sling Mount: Arisaka QD
Sling: Ferro Concepts Slingster
Sling Keeper: Neomag Sentry Strap

I think that's everything short of detents and springs. Happy to answer questions!

EDIT: One more thing. Cable management. Arson Machine Picatinny WireGuide System. No more zip ties! They're excellent.

[Zeneffect]

Buy ammo from the same people that built your barrel. I don't think you can find a much better combination...

https://www.precisionfirearms.com/48m8/a...-ammo.html

You 3 gun this?

[TapRackBang]

Most companies do not ship ammo to Massachusetts. It's not a competition gun, no.

[Zeneffect]

I looked into the MA scheme and it's very similar to California's. You might find some reprieve by calling local FFLs as you can have ammo shipped there. Usually they charge a transfer fee, which is why you call around. It's so bad here, some offer monthly "club" rates where the transfer fee is waived for 30 days if you pay XX dollars up front.

It's a crummy situation, the tides of change are coming though.

[TapRackBang]

Legally, one doesn't need to send ammo to an FFL. Retailers could get a copy of my license to carry and legally ship it to me. This is why I'm able to get ammo from Midway, Target Sports USA, Midsouth Shooter's Supply, etc. However, most companies either don't want to "risk" it or don't have the desire to keep track of licenses. Local FFLs aren't keen on receiving ammo, either. They'd rather sell it to you. So, even if they will do it, you're going to pay a transfer fee. With today's prices, that's suboptimal.

That's why I asked about common, off the shelf selections. Something I can find at Target Sports USA, Midway, etc.

Change can't come soon enough.

[Zeneffect]

@Mark ^^

Is this something you can address?

[Steve_evetS]

[video]https://youtube.com/shorts/LItRA8j5SVM?feature=shared[/video]