Posts: 137
Threads: 22
Joined: Apr 2022
What presently available bullet do you guys recommend. 100 gr to 123 gr would be my preferred weight range. I have some 100 gr Nosler BTs on hand, but would like to pick up some other bullets. I have Lapua cases on order.
Posts: 73
Threads: 10
Joined: Jan 2022
Mid south Shooters Supply has Hornady 123 gr. hpbt bullets for $32/100. Its a match bullet, not recommended for hunting.
Posts: 938
Threads: 47
Joined: Oct 2019
I refuse to be victimized by notions of virtuous behavior.
Posts: 81
Threads: 8
Joined: Jan 2022
You just have to keep an eye on your favorite websites and grab some when a deal pops up.
I bought some 123 fmj blemished bullets for $0.26 each. Also some blemshed 107 grain tipped bullets, speculation was these were Speer brand, at a discount.
Posts: 145
Threads: 3
Joined: Feb 2018
My "Cheap Bullet" are SMKs.
I know people used to love the 120gr rem core-loct if you can find them.
Posts: 1,285
Threads: 47
Joined: Feb 2019
Cheapest decent Grendel bullet is the 90TNT. Which appears to have carried a disproportional load of DNS' 250,000lb of hog kills, at distance out to 300+ yards.
It's very accurate, and also very forgiving to reloaders. And it is highly effective on >200lb hog - meaningb hat probably will be good on deer as well.
Only real detriment is it's not a long range bullet. If interests go past 300 yards, other will outshine it.
Posts: 137
Threads: 22
Joined: Apr 2022
I should have mentioned what the bullet would be for. Id want to use it for paper punching, plinking (grandkid involvement) and pig hunting. For deer season Ill likely use my 260 bolt gun and 120 gr Nosler BTs. Ive agreed to buy some Hornady 123 SST ammo, so that will be used up first. Then I can reload, using some 100 gr Nosler BTs. So, it isnt like I need to stock up on supplemental bullets right now, but I do need to decide on what bullets Im going to use after that. And, of course, cheap is desired. Ideally, Id just stay with the 100 gr Nosler BTs, but who knows when Nosler will offer them for sale.
If DNS is using that 90 gr TNT bullet, maybe thats the one I need. Ive watched plenty of his videos, and if thats the bullet in use, it seems to be doing the job. And, itll give me about all the velocity available with the Grendel. Still, I have had plenty experience on pigs and deer with the 100 gr Nosler BT, and it has seemed to do the job as well as the 120 gr BT does, so that would be my first choice, though they arent as cheap as they once were.
Posts: 222
Threads: 13
Joined: May 2016
04-22-2022, 02:14 PM
(This post was last modified: 04-22-2022, 02:16 PM by dpete.)
Old Bob Wrote:https://redriverreloading.com/outdoor-st...r=ammoseek
250count:
https://www.midsouthshooterssupply.com/i...nt?Tk=DFBU
These right here. Hornady 123 gr. hpbt bullets at Midsouth. All my grendels love them. I originally bought some because my 12.5" Grendel doesn't like the Nosler 123 HPBT. These shot great in the 12.5" and as well or better out of my RARR Grendel with the same exact load.
Still instock as of 4/22/22 at 09:15
Thanks for the heads up. I've been hoping to see these again.
Posts: 1,716
Threads: 42
Joined: Aug 2011
You can almost always get these Prvi 120 grains from Graf's. I'd consider them close to the Hornady 123 BTHP. This is the bullet that was used in the old Wolf Gold ammo.
https://www.grafs.com/retail/catalog/pro...roductId/3
Paul Peloquin
Did government credibility die of Covid or with Covid?
Posts: 6,206
Threads: 50
Joined: Mar 2011
The Speer 90 grain TNT can be found for $.22-.25 each. Ive bought a lot of factory over runs and blems from shooters pro shop and Sierras outlet store. The over runs are usually the best deal but the blemished bullets are good for short range.
Posts: 137
Threads: 22
Joined: Apr 2022
Id buy some of those 90 gr Speers if I could find some. Any suggestions?
Posts: 6,206
Threads: 50
Joined: Mar 2011
A few of my sources are currently out of stock. It is very common for 6.5 bullets to sell out before the next production run makes it to the vendors. If you see something you want you have to act fast since demand seems to be more than the supply. All loading components dont stay in stock long these days.