Posts: 7
Threads: 1
Joined: Feb 2022
I have an older 24 Overwatch 6.5 Grendel and was told it has a Shilen barrel. Its looks like the one in the link.
It has the WCI muzzle brake, no holes composite hand guard on it. Never been fired.
https://www.impactguns.com/semi-automati...-ovw24gre/
It looks like there were several barrels offered from what I have found while searching this site. How can you tell what barrel it has or do I need to contact AA to get that info?
Read mixed reviews here about the Overwatch and trying to decide if I want to keep and shoot it or sell it.
Posts: 8,507
Threads: 241
Joined: Sep 2014
Whats the twist rate listed on the barrel?
There were several barrel suppliers back then.
Satern cut-rifled barrels with 1/8.75 twist on the 20 and longer rifles. These were usually fluted if I recall correctly.
Shilen button-rifled match barrels
Wilson economy barrels
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
Posts: 7
Threads: 1
Joined: Feb 2022
I dont see any markings on barrel but you cant see under the hand guard as its solid/no holes in it. Where would the marking be at?
Posts: 7
Threads: 1
Joined: Feb 2022
02-13-2022, 02:05 AM
(This post was last modified: 02-13-2022, 02:09 AM by Fatfart.)
The rear of the manual says :
The 6.5 Grendel rifle is available in a number of configurations.
~24" lapped barrel rifle with picatinny rail topped receiver and free floating tubular hand guard and precision trigger.
To me, the trigger looks milspec, (it has two S stamps on the hammer) but I am not a trigger expert.
Barrel is not fluted and has a black finish on it.
Posts: 259
Threads: 4
Joined: May 2015
I bought an AA Overwatch upper from Midway many years ago, mine has a Shaw barrel, 1/9, no markings on it are visible above the tube fore end, was assembled prior to Shilen being an option from AA on the Overwatch. The Shaw is a MOA barrel and heavy, it was a way to get into 6.5 Grendel, but I wouldn't buy another. I have a 20" Shilen 6.5 Grendel barrel that has engraving on it, identifying it as a Shilen. I don't know if the AA Overwatches with a Shilen barrel were engraved similarly.
Posts: 937
Threads: 47
Joined: Oct 2019
I refuse to be victimized by notions of virtuous behavior.
Posts: 7
Threads: 1
Joined: Feb 2022
02-14-2022, 10:48 PM
(This post was last modified: 02-14-2022, 10:51 PM by Fatfart.)
Alexander Arms said its a AA barrel stainless steel (black finish on it) from 2008 1/9 twist. The gun shop said it had a Shilen barrel. From the mixed reviews I think I will try and sell it and and build one with a match barrel.
Posts: 39
Threads: 1
Joined: Apr 2015
My Alexander Arms 24 inch Shilen barrel is 1 to 9 twist.
Posts: 7
Threads: 1
Joined: Feb 2022
Are there any markings on the Shilen to differentiate it from an AA barrel?
Do they have the same contours?
Posts: 1,567
Threads: 8
Joined: Sep 2012
Have you removed the handguard to see what may be stamped around the chamber end of hte barrel. I have seen that on several - wish they would stay on the other end, much simpler to find.
Posts: 8,507
Threads: 241
Joined: Sep 2014
I would recommend not trying to remove the AA handguards from that era.
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
Posts: 259
Threads: 4
Joined: May 2015
LRRPF52 Wrote:I would recommend not trying to remove the AA handguards from that era.
:nod
Posts: 7
Threads: 1
Joined: Feb 2022
Took the rifle to gunsmith and he used his bore scope to look for any marking on the barrel under the hand guard and didn't see any marking on the barrel.
He then looked in the bore and said it was one of the better bores he as seen in a non premium barrel. Everything is crisp and polished. I guess I will just take a chance on it and keep/shoot it.
Is the hand guard carbon fiber or some other composite? Will it hold up to heavy use with a bipod on it?
Posts: 8,507
Threads: 241
Joined: Sep 2014
If it looks like this, yes, the handguard is CF and holds up very well to heavy use.
![[Image: r-ovw24gre__40645.1544136971.png?c=2]](https://cdn11.bigcommerce.com/s-1kqh9qmybo/images/stencil/640w/products/32871/61154/r-ovw24gre__40645.1544136971.png?c=2)
Actually, the rifles built around that time are now collectible since those SKUs have been discontinued long ago.
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
Posts: 7
Threads: 1
Joined: Feb 2022
LRRPF52 Wrote:If it looks like this, yes, the handguard is CF and holds up very well to heavy use.
Actually, the rifles built around that time are now collectible since those SKUs have been discontinued long ago.
It is the one in the pic but has the WCI muzzle brake on it. At the gun shop it was sitting next to a bunch of 16" 18" AR's, it really stood out and with the brake it, it dwarfs the other AR's.
I wasn't a fan of the CF hand guards back in the day but it really fits the black paint like finish of the barrel and simplistic look of the rifle.
|
