I have a question on barrel life for the Grendel.
How long will a barrel last for a Grendel?
Will the round eat it up?
See I shoot alot, not competativly (not yet al least) and my 223 barrels last forever!
I love everything I read about with the Grendel, just want to make sure it is not high maintance?!
Posts: 2,412
Threads: 31
Joined: Mar 2011
A Grendel barrel will last a ling time. Possibly longer than your 5.56 tube. I'm sure some of the other guys will correct me if I'm wrong on that last, and they can give you more info as well.
Posts: 1,685
Threads: 55
Joined: Mar 2011
Probably depends somewhat on the quality of the barrel, but ~5k+ seems like a reasonable expectation for the top-quality barrels to maintain respectable accuracy, especially if used primarily for deliberate shooting without heating things up with mag dumps.
Generally speaking, I don't think the 6.5 bore at Grendel velocities is terribly hard on barrels. Shrink the bore and increase the speed, such as the case with some of the 6mm Grendel-based wildcats, and life expectancy will likely decline.
Drifter
If you go by the chart here http://www.accurateshooter.com/technical...y-formula/, theoretically the Grendel should offer longer barrel life than the 5.56. Additionally, the Grendel runs at a lower pressure than the 5.56.
So no rapid heavy firing?
Not that I do that. That's for my MP15-22!
So look for a good barrel?
Any suggestions on an upper?
AArms? Do they math up well with other
Companies lowers. I was thinking of Rick river or a
Bushmaster lower??
Thanks for the link that is a good one.
wojo14, I like rock river lowers a lot, I am looking at a J&T upper but I have never used one, the price is right however, http://jtdistributing.net/store/page148.html
OLd_Sarge
OLd_Sarge Wrote:Thanks for the link that is a good one.
wojo14, I like rock river lowers a lot, I am looking at a J&T upper but I have never used one, the price is right however, http://jtdistributing.net/store/page148.html
OLd_Sarge
Welcome, OS. You wouldn't happen to be the same Old Sarge on the FAL Files, would ya?
Jt uppers do not give much of a spec.
Are they 6.5grendel bolts?
whichever brand you decide spend the extra and make sure the barrel is nitrided it will extend the life even longer,stay away from any chrome lined barrels
Posts: 244
Threads: 20
Joined: Feb 2012
03-17-2012, 01:12 AM
(This post was last modified: 03-17-2012, 01:13 AM by CPT.CRAZY.)
I just got my j&t kit fit and finish is good. They do use a 6.5 bolt not the 7.62 bolt.
[SIGPIC][/SIGPIC]
Is this Loki any good? I see the bolt is compatable?
wojo14 Wrote:Is this Loki any good? I see the bolt is compatable?
JP is really the only one considered a competitor ,and loki rifles come with more options for less money.
there are many magazine articles out about us for review and more to come this year. Testing for some military contracts going on ,and a few police department that have switched to Loki rifles. There are many champion shooters in 3gun that run Loki rifles as well (they are not paid to do so).
Thanks,
nope I am not the same guy, I assume I am not the only old sarge out there 
Posts: 4,444
Threads: 97
Joined: Mar 2011
jwilson1985 Wrote:JP is really the only one considered a competitor ,and loki rifles come with more options for less money.
there are many magazine articles out about us for review and more to come this year. Testing for some military contracts going on ,and a few police department that have switched to Loki rifles. There are many champion shooters in 3gun that run Loki rifles as well (they are not paid to do so).
I'd have to disagree with that assessment.
AA's rifles are considered top of the line as well. There are also very high quality rifles manufactured in Grendel from Templar and a few others.
I have seen JP's rifles, I've seen Templar rifles, and I've seen multiple AA rifles that would meet anyones quality standards. Although I've heard good things about Loki, I haven't seen or shot a rifle, so I can't really comment on them.
However, to simply state that JP is the only thing that compares is simply wrong. AA's cut barreled rifles are simply top of the line as well.
You seek escape from pain. We seek the achievement of happiness. You exist for the sake of avoiding punishment. We exist for the sake of earning rewards. Threats will not make us function; fear is not our incentive. It is not death that we wish to avoid, but life that we wish to live. - John Galt
What about Precision Forearms 6.5g uppers?
I have five Grendels. If I use them all, my wife will be selling them at the estate sale, and they will all be good.
I shoot .223 barrels competitively and mine don't last forever, in fact I go though two or three a year. Of course that depends upon your expectations, when I change mine out is when they will no longer hold X ring at 600 yards. These same barrels will usually shoot less than MOA at 100 yards and many people would still be happy with them. I usually sell them to blasters who think they are just fine.
The 6.5 Grendel outlasts the .223 or 5.56 if they are used with hot loads.
Bob
jwilson,
What barrel manufacture do you use, your specifications only say 416 stainless? It would be ironic if it were Wilson.
Bob
stokesrj Wrote:jwilson,
What barrel manufacture do you use, your specifications only say 416 stainless? It would be ironic if it were Wilson.
Bob lol, we use satern and mcgowen and then they are nitrided
lol, we use satern and mcgowen and then they are nitrided
sweet
I like the sound of that!
|
