Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
127 lrx starting loads
#1
So I have a couple of 127 barnes lrx pills leftover from a 6.5 sweed project. I was going to burn them up in grendel. Does anyone have a good start point and max with 8208, cfe or h335. Thanks. Btw these will be used exclusively in a ruger bolt action. My ar doesn't like barnes. Thanks.
Reply
#2
Don't waist the h335 or 8208 on them.

If you don't have any h4985 then start the cfe223 at 26 grains.
Reply
#3
I would also recommend H4895 starting at 25.0gr working up in .3gr increments over a chronograph.

CFE223 is very forgiving but you will find a max load with it with Grendel case volume under the 127gr LRX.

How far out can you load it in that action before jamming the lands?
NRA Basic, Pistol, Rifle, Shotgun, RSO

CCW, CQM, DM, Long Range Rifle Instructor

6.5 Grendel Reloading Handbooks & chamber brushes can be found here:

www.AR15buildbox.com
Reply
#4
If you're going to invest in a Barnes bullet for 6.5 Grendel, their new 115gr VOR-TX bullet would be the money.

Expansion threshold on that bullet is ideal for 6.5 Grendel.
NRA Basic, Pistol, Rifle, Shotgun, RSO

CCW, CQM, DM, Long Range Rifle Instructor

6.5 Grendel Reloading Handbooks & chamber brushes can be found here:

www.AR15buildbox.com
Reply
#5
What is the minimum velocity for the new 115gr? 2,000fps?
Reply
#6
IIRC Barnes says 1500-1600 something like that.
"Down the floor, out the door, Go Brandon Go!!!!!"
Reply
#7
Happy2Shoot Wrote:What is the minimum velocity for the new 115gr? 2,000fps?

Barnes says 1600 for both the new 115 tac-tx and the 127 LRX.
Reply
#8
Are the 115gr available yet? If so, where?
Reply
#9
available as factory amoo, I bought one box to try. ammoseek.com is the place to look.
"Down the floor, out the door, Go Brandon Go!!!!!"
Reply
#10
Thanks.
Reply
#11
A5BLASTER Wrote:Barnes says 1600 for both the new 115 tac-tx and the 127 LRX.

Is that info on their website or do you have to call to inquire?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)