TC Contender in 6.5 Grendel

[A5BLASTER]

I very much enjoyed talking with him.

A5, after my conversation with Troy I won’t risk damaging my contender. Troy feels the Grendel is just too close to the limit. Mine is a Contender; not G2 Contender.

That's why I bought the bare encore frame, so I don't have to worrie about pressure damaging it.

Planning a 28 inch barreled range toy and a second barrel done up in 358 grendel for primitive weapon season.

[rabiddawg]

I use mine for primative also. 44mag 21” thumbhole laminate stock and forearm. Sweet little thumper

[LRRPF52]

I don't know what it is about the TC Contender but I've always wanted one, and I'm a filthy gas gun guy through-and-through.

I can't think of a more ideal cartridge for it, whether shooting steel silhouettes or hunting.

[1Shot]

I went over to the MGM web site and they say that the 6.5 Grendel is to be used on G2 Contender frames ONLY and Encore of course.

They also list now a number of calibers as G2 ONLY that used to not have this warning. Thank goodness the 30-30AI is not on that list. Even if it was I would still be shooting it on my G1 frame like I have for about 10 years with no problems.

[Bobke]

Curious to know from those owning and loading 6.5 Grendel in any format Contender, what spec is chamber cut to-SAAMI or something with a bit longer throat/freebore that would allow for longer COAL?
Also, have two older Contender frames that could use some attention-what gunsmith would you consider for a serious tuneup? Is SSK still viable? Others?

[1Shot]

Curious to know from those owning and loading 6.5 Grendel in any format Contender, what spec is chamber cut to-SAAMI or something with a bit longer throat/freebore that would allow for longer COAL?
Also, have two older Contender frames that could use some attention-what gunsmith would you consider for a serious tuneup? Is SSK still viable? Others?

Do a Google for the Specialty Pistols forum. Go there and ask this question and you will be guided to where you need to go.

[GregP42]

Curious to know from those owning and loading 6.5 Grendel in any format Contender, what spec is chamber cut to-SAAMI or something with a bit longer throat/freebore that would allow for longer COAL?
Also, have two older Contender frames that could use some attention-what gunsmith would you consider for a serious tuneup? Is SSK still viable? Others?

Hit the IHMSA forum and ask who is the goto person now. I used a local that is now retired due to age and health.

Greg

[Chev2500]

That's why I bought the bare encore frame, so I don't have to worrie about pressure damaging it.

Planning a 28 inch barreled range toy and a second barrel done up in 358 grendel for primitive weapon season.

I have quite a few Encore's and Contender's- from 20 Vartarg to 416 Rigby. I use a lot of Bellm tc parts and info- excellent source for the TC guns. He did an accuracy test with 5 different barrels in an Encore with 28' barrels and then cutting them to 23". Here is the link if you're interested: https://www.bellmtcs.com/blog/barreltest/

[JASmith]

The Encore will certainly accommodate long cartridges if the chamber is designed for them. One will likely also get excellent accuracy when using ammunition tailored to the longer throat.

The price paid is that factory ammunition may not be as accurate due to the expected greater jump.