Faxon Firearms parts quality

[MikaS]

What is to yours opinion Faxon parts quality? I think they 6mm ARC 20" match barrel and 6 .5G/6mm ARC bolt.

[BluntForceTrauma]

I think they are solid. If they had what I wanted, I would not hesitate to buy from them.

[VASCAR2]

I have two of the Faxon Group Buy barrels sold by BFT. These two barrels (16” & 18”) are really close in using a seating depth comparator with different bullets. I have checked 8 different 6.5 Grendel barrels and my two Faxon Monster barrels appear to be very consistent in manufacture. Granted this is comparing two Faxon to a J&T, Shilen, two Brownell’s Liberty barrels with compound throat, Lothar Walther and a 12” Monster by Green Mountain. The two faxon barrels had the same seating depth or within a couple thousandths which impressed me.

I used the exact same bullets for all the barrels and exact same procedure to measure the seating depth with each barrel. This could be a fluke but comparing the numbers the Faxon appear to be consistent and in spec. The Brownell’s had short chambers and was very obvious comparing them to the other barrels.

[Bretandry]

I have one of their barrel and BCG sets on one of my 5.56 AR's in .223Wylde with a SIG BDX optics I can ring a ten inch steel at 400 yards every time no sweat. Now this isn't any great shooting but she is reliable and groups nice for the price point of Faxon I wouldn't hesitate to get another one. I did get the best match grade though.