Posts: 222
Threads: 58
Joined: Dec 2017
So i have BCG from toolcraft for 6.5G, and now I received just bolt from JP when purchased their barrel.
those parts I know *should* be interchangeable, but just wanted to make sure: is it OK if I grab my Toolcraft carrier and use it with JP 6.5g bolt?
I assume I do not have to headspace gauge it right? cuz its JP who sent me boplt+barrel and I assume i can *trust* them that they did it right and i can just go ahead use it with toolcrafts carrier.
(and use toolcrafts 6.5G bolt in some other build with non-toolcraft carrier also OK , correct?)
Posts: 6,193
Threads: 170
Joined: Mar 2015
The bolt will work fine with the barrel.
It's the bcg and firing pin length you need to check with that toolcraft stuff. They have been known to use a bolt and firing pin that is not of proper length.
Easiest thing to do is measure the length of both bolts. If they are the same then you will have no issues with the fireing pin. If the toolcraft bolt is shorter or longer you will have issues with the length of the fireing pin.
Posts: 222
Threads: 58
Joined: Dec 2017
JP bolt: 2.813
toolcraft bolt (taken out of toolcraft bcg): 2.811
OK to interchange i guess?
Posts: 4,287
Threads: 156
Joined: Jan 2017
Those 2 are within tolerances. The problem comes when they are 0.011 +/- apart.
The carrier itself is "agnostic", doesn't care what bolt you use; like A5 says the bolt and firing pin are what has been an issue.
IF you have a *short bolt+short pin* or whatever from toolcraft they will work ok as long as they are kept together (pin and bolt).
I hope I haven't mixed any of this up... several threads on those TC bolts and firing pins.
The longer bolt for the grendel is to allow use of the standard firing pin but allow for the 0.136" (extra 0.011) depth of the bolt face.
"Down the floor, out the door, Go Brandon Go!!!!!"
Posts: 2,062
Threads: 88
Joined: May 2016
JP checks the headspace of the bolt with the barrel to ensure proper function. You can't buy a JP barrel without a JP bolt. It's their way of ensuring quality and limiting the phones from ringing due to headspace problems that may arise from another manufacturers QC problems.
Let's go Brandon!
