07-28-2019, 04:43 PM
Good shooting.Once you find the bullet and load it likes.And that may take you some time.It will easily be a sub moa shooter.You’re not far now.
|
AT3 FF-ML 20 Inch Faxon 6.5 Grendel Upper Range Result
|
|
07-28-2019, 04:43 PM
Good shooting.Once you find the bullet and load it likes.And that may take you some time.It will easily be a sub moa shooter.You’re not far now.
09-11-2019, 11:42 PM
Jimla I have heard that cfe223 is very temp sensitive have you found this to be true with your testing ?
09-12-2019, 09:07 PM
Scrape hunter Wrote:Jimla I have heard that cfe223 is very temp sensitive have you found this to be true with your testing ? I don't have temp sensitive problems at all in Hawaii, my hunting area and range only changes +/- 10 Degrees year round. CFE223 is know to be temperature sensitive and higher velocities. If you shooting at different temps(cold and hot), I would lose 50-100fps and focus on less sensitive powers like IMR 8208 XBR and AR COMP.
10-03-2019, 04:27 AM
I got a new lot of CFE223 powder, I tried a 10 shot Satterlee's load development and loaded the previous accurate load.
I was surprised how well 10 shot Satterlee's worked, it found my previous 30.8gr and 31.2gr nodes, see graph. At 30.8 it is at a bottom out in a flat area and at 31.2 it is a flat area with a sight drop of Velocity increasing .1 grains. [ATTACH=CONFIG]14727[/ATTACH]
10-03-2019, 04:52 AM
Jimla Wrote:I got a new lot of CFE223 powder, I tried a 10 shot Satterlee's load development and loaded the previous accurate load. Nice to see some confirmation of that method. |
|
« Next Oldest | Next Newest »
|