Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Runner Runner Upper
#1
Does anyone have any input on these? I am thinking about getting one:


6.5 Grendel 18" Upper by Runner Runner Guns

We took pride in creating our 6.5 Grendel Upper. It is proven, durable and reliable. This upper uses premium parts and a Diamondhead VRS-T Rail System which is one of the lightest hand guards available and the complete upper weighs just over 4 lbs. The Diamondhead VRS-T handguard is one of the best handling hand guards made and allows for fast configuration changes and uninterrupted mounting surface for optics. You can customize the rail with any number of rails or bumpers including optics, lasers, forward grips, etc.

Inside the upper you will find a full auto Bolt Carrier Group capable of years of service. The barrel is a 18" Satern 1/8 twist-rate chambered in 6.5 mm. The barrel is teflon coated.

Specs:

Complete Upper, just bolt/pin onto your lower (pins not included)
18" 6.5mm 1/8 Teflon coated barrel
Mid Length Gas
Precision Forged Upper
13" Diamondhead Rail System Installed
A2 Flash Hider Installed
Forward Assist Installed
Charging Handle Installed
Ejection Port Cover Installed
Full Auto M16 BCG Installed (Chrome Lined, MPI Tested)
Low Profile Gas Block Installed
Mid Length Gas Tube Installed
Military Anodized Coating
Combat Durable
Assembled by U.S. Veterans
Made in the USA
Reply
#2
Never heard of a teflon coated barrel
Reply
#3
https://www.runnerrunnerguns.com/Product...ETE-6.5-18[/URL]
Reply
#4
I bought one of these for my first grendel. They use liberty 5r ss barrels. The finish on the barrel is very nice. It fired the hornady and wolf factory loads fine and was about 3/4 moa with handloaded nosler B.T. I am still using the upper and bolt carrier but recently sold the barrel and the handguard. I did this out of personal preference nothing at all wrong with the upper. Teflon coating is a pretty good way to coat a barrel and looks real nice. I would recommend it for hunting or just plinking but if your looking for something super accurate I would go with something else.
Reply
#5
Thanks! Thinking about using it with a night vision scope to hunt
Reply
#6
If you do google search and keep looking there are a few companies that have yours that shoot these Grendel. They probable using the 264lbc but they are out there
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)