Greetings from Oz.
#1
Traded Zap (my 5.56 Ruger MPR) for a new Arrow Products 6.5 Grendel because everyone wears armor now and that little bitty round don't cut it. Had some failure to feed problems with the first mag but changed it out for a dedicated 6.5 mag and haven't had any more problems. We're still getting to know each other so groups are still 2" @100yds but it's getting better. Scope is a SWFA 10X fixed pwr. I'd be interested to hear what ya'll have done to make friends with this critter.
Reply
#2
Welcome to the forum KAR! Careful with the 6.5 Grendel as it is very easy to get addicted to this cartridge. I have five AR-15’s chambered in 6.5 Grendel plus a a Cz 527. I reload for 6.5 Grendel and that adds to the addiction. I’ve shot several varieties of bullets 123 grains or less. You have to watch the online vendors for ammo and 6.5/.264 bullets as they tend to sell out fast. I’ve shot a lot of Nosler and Sierra Blem and factory over run bullets. The Barnes Match Burners are a popular bullet in the 6.5 Grendel.

There are a few sources currently loading 6.5 Grendel and AAC ammunition is supposed to release 6.5 Grendel ammo any time. Starline 6.5 Grendel brass has been getting easier to find and 6.5 Outfitters has about the best price and is currently available.

Graf & Son used to be the importer for Prvi Partizan and still have PPU bullets and brass. Graf’s may not have the absolute best prices but they are a reliable vendor.
Reply
#3
Here are some links, I have no affiliation with either other than being a customer.

https://www.sixfiveoutfitters.com/


Graf’s 6.5 Grendel ammo

https://www.grafs.com/retail/catalog/cat...goryId/175

Graf’s 6.5 mm PPU bullets

https://www.grafs.com/retail/catalog/cat...goryId/916

Other 6.5 bullets at Graf’s

https://www.grafs.com/retail/catalog/cat...goryId/916
Reply
#4
Good info. Thanks much.
Reply
#5
Welcome to the horde from Wisconsin .
Reply
#6
sundowner Wrote:Welcome to the horde from Wisconsin .

Howdy.
Reply
#7
I saw oz and was thinking Australia. Level 3 will still stop grendel. If poking holes in hardened steel or ceramic is your thing, go back to 5.56 and look at black tip
Reply
#8
KAR,

I agree with Zene - Wrong calibre if armor piercing is what you want. Easier to stick with 5.56 and use SS109/M855.
Reply


Forum Jump:


Users browsing this thread: