Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Coyote Hunting in Iowa
#1
Got a big male coyote to come in on pup distress sounds. Dropped at 126 yards with the 20" 6.5 Grendel/Pulsar Trail 2 XQ50 LRF. Speer 90 grain TNT with 30 grains of H335, CCI 450, Hornady Brass.

[ATTACH=CONFIG]18824[/ATTACH][ATTACH=CONFIG]18825[/ATTACH][ATTACH=CONFIG]18826[/ATTACH][ATTACH=CONFIG]18827[/ATTACH]


Attached Files
.png   IMG_6998.PNG (Size: 387.75 KB / Downloads: 46)
.png   IMG_7000.PNG (Size: 399.38 KB / Downloads: 35)
.png   IMG_7002.PNG (Size: 340.4 KB / Downloads: 31)
.png   IMG_7004.PNG (Size: 442.02 KB / Downloads: 33)
Reply
#2
Congrats on the big yote .
Reply
#3
congrats and great looking "rig". Thanks for the info on the load. Been meaning to try that recipe but the shortages and expense don't allow that right now. Thanks for the post/pics.
Reply
#4
Thanks. I just got into loading ammo; this was my first batch. Before, I was shooting Hornady Black 123 grain ELD-M as it was all I could find but I was getting too many runners. The TNT's have worked much better for me. In my 20" Grendel the MagnetoSpeed had a velocity reading of approximately 2700 fps with the 30 grains of H335. I may increase the powder a bit next time to maximize my MPBR. I like to use the StrelokPro app to calculate my holds and for what-if scenarios in loading ammo.

[ATTACH=CONFIG]18830[/ATTACH]


Attached Files
.png   IMG_7011.PNG (Size: 228.38 KB / Downloads: 26)
Reply
#5
I have the cheap version of Strelok. I use it to initially confirm my loads. I zero at 70yds which comes back across zero at 140yds, and the SST flies so good I'm an 1" low at 40yds and again at 170yds, and the peak in between is only .35" high . Most of my shots are less than 200yds. At 200yds I'm only 2.5" low, so I just aim at the back line and it usually works well IF I can get steady.Rolleyes This works the best for me because my gray hair keeps me from remembering all the numbers Smile
Welcome to the forum. Good huntin to ya.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)