03-22-2014, 03:52 AM
I am with Vascar2. I got the same barrel in 2012 and just got another for a build for a friend. I saw the same marks on extracted ammo as you have in the picture. I 'melted' the ramps per LRRPF52's instructions and the marks went away. I believe most of the marks were from the sharp corners on the inside corners of the feed ramps, the rest came from the ejector pushing the bullet into the 2nd extension notch CCW from the right feed ramp. Soften those sharp edges and the marks will disappear, at least they did on mine.
It will be a shooter for you. With factory AMAX, I am under 1 MOA, and in a better shooter's hands, I think it would approach 0.5 MOA.
Good Luck!
It will be a shooter for you. With factory AMAX, I am under 1 MOA, and in a better shooter's hands, I think it would approach 0.5 MOA.
Good Luck!