Hey, guys, I carbon-locked my flash hider to my 12" Grendel. Oops! Shoulda been on top of cleaning it each time. Cannot remove that sucker with a wrench! Want to somehow loosen it chemically before I crank on it anymore mechanically.
BFT I bet mine wont come off either ..going to shoot the cloven hooved beast next weekend, then Im going to try to remove mine .I think about removing it every time I clean barrel but for some reason I dont.
Lazy?????? Wipe-Out(Sharp Shoot R Percision products) makes a cleaner called Carb-Out. It has done a great job for me.
CJW Wrote:I think about removing it every time I clean barrel but for some reason I dont.
Right?!? And I always lube the muzzle threads with the same moly-lithium grease I use on the receiver threads for the barrel extension. Don't know if I forgot on this one, or burned it off with overheating, or what.
Just got back from Walmart, nosing around in the auto supplies area. Figured they'd have something that removed carbon from steel parts. Got some "Fuel Injector and Carburetor Cleaner"; 6 oz. bottle for $2.47. Gonna pour some in a pill bottle, stick the muzzle end with the stuck muzzle device in there overnight and see what happens....
Thanks for suggestions, was out and about when they came in; will try if this doesn't work.
:: 6.5 GRENDEL Deer and Targets :: 6mmARC Targets and Varmints and Deer :: 22 ARC Varmints and Targets
BluntForceTrauma Wrote:Right?!? And I always lube the muzzle threads with the same moly-lithium grease I use on the receiver threads for the barrel extension. Don't know if I forgot on this one, or burned it off with overheating, or what.
Just got back from Walmart, nosing around in the auto supplies area. Figured they'd have something that removed carbon from steel parts. Got some "Fuel Injector and Carburetor Cleaner"; 6 oz. bottle for $2.47. Gonna pour some in a pill bottle, stick the muzzle end with the stuck muzzle device in there overnight and see what happens....
Thanks for suggestions, was out and about when they came in; will try if this doesn't work.
Well, it "worked." Sample size is too small to say it's a "solution" for all users in this situation. Coulda been loosened due to the chemical action; coulda been I subconsciously cranked the wrench just a little extra harder this time. Upper was secured in my vise using the Magpul BEV Block.
See photos.
NOTES: After soaking overnight, there was no visible damage to the nitrided steel. There was zero carbon in the bottle; even after the soak it was clear as water. However, dumping the liquid from the removed muzzle device there was tiny black "dust" suspended in the water-like liquid.
Going forward, am gonna be careful to put anti-seize moly-lithium on my muzzle threads and also remove the device regularly for cleaning, but what I'd really like is a reliable way to remove the caked carbon from the face of the muzzle.
Will try this again to clean up caked muzzles since I have it, but will also keep Kroil in mind.
End of the story? Dumped the used carb cleaner in my Toyota's gas tank, along with the rest of the bottle.
:: 6.5 GRENDEL Deer and Targets :: 6mmARC Targets and Varmints and Deer :: 22 ARC Varmints and Targets
06-15-2022, 08:15 PM (This post was last modified: 06-15-2022, 08:32 PM by Harpoon1.)
I just started using Superlative Arms gas blocks. According to them, using the bleed off function requires no maintenance! Yes, Im dubious of that claim too! Anyway, surely its a maintenance item regardless and a few drops of oil and exercising the screw after every session does help.
However after some neglect and becoming stuck .this may help!
I'm a big believer in anti seize and/or moly grease on threads. I also like to keep the crown clean so I understand wanting to keep everything that is removable, removable. For busting loose locked threads I use either Kroil or Free All.
I didn't have much luck with CLR. I watched his video a while back and tried it. It did loosen up some carbon but BoreTech Carbon Remover worked better for me. I keep a small capped container that I'll drop revolver cylinders in. Talk about easy to clean! The carbon staining wipes off with little or no scrubbing. Works for muzzle devices but it will slightly discolor light colored cerakote.
